How much does a custom sauna cost in Indiana?

Short answer: a typical custom sauna build from Sauna Craft starts around $10,000 and goes up with room size, wood species, heater choice, and custom features (FAQ). Planning an indoor room and want an interactive ballpark before you call? Try our instant sauna cost estimator.

The initial phone consultation is free and there is no obligation (Our Process). Jason Guilliam designs and builds every sauna from our shop at 15697 Lin Rd in Fortville, covering Central Indiana: Hamilton County (Fishers, Carmel, Noblesville, Westfield), Indianapolis, and Hancock County.

Price by type of build

Every build is quoted after an on-site visit and measure. Most custom builds start around $10,000, and what is included depends on the type of room:

  • Small indoor room (basement or spare room, 2–3 people): Framing inside existing walls, foil vapor barrier and insulation, heat-ready cedar or hemlock interior, custom benches, glass door, lighting, and a properly sized electric heater.
  • Mid-size indoor room (4–6 people): Larger footprint, two-tier or L-shaped benches, higher-output 8–10.5 kW electric heater, and optional glass front wall or under-bench LED lighting.
  • Outdoor / backyard sauna: A standalone small building with a level base, weather-tight roof, exterior siding, insulation for Indiana winters, cedar interior, and either a 240V power run or a wood-burning stove with chimney.
  • Trailer sauna (you bring the trailer): Built at our Fortville shop—framing, insulation, cedar interior, benches, and a wood stove, propane heater, or electric heater.
  • Commercial sauna (gym, YMCA, clinic, team facility): Heavy-duty commercial heater rated for continuous daily cycles, ADA-ready layout where needed, durable bench framing, and coordination with your general contractor.

What moves the price

1. Room size, which sets the heater size

Measure length × width × height in feet. A 6 × 8 ft room with a 7-ft ceiling is 336 cubic feet. Heater manufacturers rate each model for an insulated cubic-footage range (plus extra equivalent volume for uninsulated glass or tile surfaces), so a larger room requires a larger heater plus more lumber, bench framing, and labor.

2. Where the sauna goes

3. Type of heat

  • Electric (traditional): The everyday choice for indoor rooms. Requires a dedicated 240V circuit.
  • Wood-burning (traditional): We build these only as outdoor standalone saunas or trailer saunas, never indoors. You are investing in the stove package plus through-roof chimney work. See wood-burning saunas in Indiana.
  • Infrared, hybrid, and steam: We build all three (Saunas We Build). The Colts practice facility room is a hybrid combining traditional Finnish heat with infrared panels. Steam rooms require both electrical and plumbing.

Not sure which heat source fits your routine? Read Wood-burning vs. electric sauna heaters.

4. Heater cost: real retail prices

These are examples of heaters we build with, at retail list price. Material pricing in our indoor sauna estimator is pulled from our sister store Self Care Saunas at 5% below list.

Heater Type What’s in the box Typical Retail
Harvia KIP 8 kW (KIP80B) Electric, 250–425 cu ft Wall heater with built-in dials; stones extra $1,258 (Self Care Saunas)
Harvia Cilindro 16 (PC16) Wood, 212–459 cu ft Pillar stove; holds ~265 lb of stones See Self Care Saunas
Harvia Legend 150 WH Pkg (Black) Wood, 212–459 cu ft Stove, steel chimney kit, water heater, stones $6,495 (Self Care Saunas)
Harvia Legend 150 WH Pkg (Stainless) Wood, 212–459 cu ft Stove, steel chimney kit, water heater, stones $7,205 (Self Care Saunas)
Harvia Pro 20 WH Pkg (Black) Wood, 283–706 cu ft Stove, steel chimney kit, water heater, stones $6,256 (Self Care Saunas)

5. Wood and finish

We build with Western Red Cedar, hemlock, Nordic spruce, aspen, and thermo-treated woods (Saunas We Build). Wood grade, full-glass doors or window walls, custom backrests, and recessed LED lighting all move the total. YMCA Kokomo’s 10×10 ft commercial room uses Grade A Western Red Cedar with a tempered glass door.

6. Electrical (and plumbing for steam)

Traditional electric and infrared saunas require a dedicated electrical circuit; steam rooms require both electricity and plumbing (FAQ). For an 8 kW Harvia KIP heater, the manufacturer manual specifies a 40A double-pole 240V circuit with 8/2 copper wire, no GFCI breaker, wired by a licensed electrician. If your main panel has open slots, the electrical run is straightforward; a full panel is the most common surprise cost.

7. Heater-only swaps

If your existing sauna room is structurally sound, sometimes only the heater and controls need replacing. See our heater replacement project.

Permits and HOAs around Indianapolis and Hamilton County

Permit rules depend on your municipality. Indianapolis, Fishers, Carmel, Noblesville, and Westfield each oversee local building and electrical permits, with 240V circuits, detached backyard structures, and wood-burning chimneys being the primary triggers. Many Hamilton County subdivisions also have HOA architectural guidelines for backyard outbuildings. We can provide room dimensions and drawings for your HOA submittal before materials are ordered.

How long it takes & what it costs to run

Most custom saunas take 1–2 weeks from the agreed start date (FAQ), with indoor builds typically taking 3–5 working days on site. An 8 kW electric heater running at full draw uses up to 8 kWh per hour and cycles off once the room reaches set temperature (heat-up is ~30–45 minutes for traditional Finnish heat and ~10–15 minutes for infrared).

Get a real number for your space

  1. Try the instant indoor sauna cost estimator or the Right-Fit Sauna Quiz.
  2. Have a 15-minute no-obligation call with Jason for an initial ballpark.
  3. Jason visits your home or facility to measure the space.
  4. You receive a detailed written quote, followed by design, material ordering, the build, and a final walk-through (Our Process).

Call or text Jason at 317-626-5669 or use the contact form. We build across Central Indiana, including Fishers, Carmel, Indianapolis, Noblesville, Westfield, Zionsville, Greenwood, Cicero, and our home base in Fortville.

FAQ

How much does a custom sauna cost in Indiana?

A typical Sauna Craft build starts around $10,000 and goes up with size and features. The first consultation and estimate are free.

Is an outdoor sauna more expensive than an indoor one?

Usually, yes. An outdoor sauna is its own small building, so it needs a base, a roof, siding, insulation, and power or a wood stove. An indoor room uses walls you already have.

Is a wood-burning sauna cheaper than electric?

Not up front. A Harvia Legend 150 WH or Pro 20 WH stove package retails for about $6,250–$7,200, compared with about $1,260 for an 8 kW Harvia KIP electric heater, and wood also needs a chimney. Sauna Craft builds wood-burning saunas only as outdoor standalone rooms or trailer saunas.

Can you build a sauna on my trailer?

Yes. Bring your trailer to our shop in Fortville and we build the sauna there. Most of our trailer saunas are wood-fired with a Harvia Cilindro 16, and we can also fit propane or electric heat.

How long does a custom sauna take to build?

Most take 1–2 weeks from the agreed start date.

Do I need an electrician?

Electric and infrared saunas need a dedicated circuit, and steam rooms need plumbing too. A licensed electrician should connect the heater.